
24
After the oven has cooled down, soak up
any remaining water from the steam genera-
tor using a sponge and, if necessary, wipe
out with a little vinegar.
Leave the door open to let the oven dry com-
pletely.
Half Steam + Heat and Quarter Steam +
Heat
The continual change from hot air to steam
takes place automatically, with Half Steam +
Heat however with a greater percentage of
steam.
The oven functions Half Steam + Heat and
Quarter Steam + Heat are operated in the
same way as the oven function Full Steam
Cleaning and Care
1 Warning: First switch off the appliance
and let it cool down before carrying out
any cleaning.
Warning: For safety reasons, do not clean
the appliance with steam blasters or high-
pressure cleaners.
Attention: Do not use any corrosive
cleaning fluids, sharp objects or stain
removers.
Do not clean the glass oven door with abra-
sive fluids or metal scrapers, which could
scratch the surface. The glass could crack
and shatter.
Outside of the appliance
• Wipe the front of the appliance with a
soft cloth and a solution of hot water
and washing up liquid.
• For metal fronts, use normal commer-
cially available cleaning agents.
• Please do not use scouring agents and
abrasive sponges.
Oven interior
Clean the appliance after each use. In this
way, dirt is easier to clean off and is not al-
lowed to burn on.
1. After every use, wipe the oven with a so-
lution of washing-up liquid and allow to
dry.
3 Clean stubborn dirt with a special oven
cleaner.
1 Important: If using an oven spray,
please follow the manufacturer's in-
structions exactly.
Accessories
Wash all slide-in units (shelf unit, baking tray,
shelf support rails etc.) after each use and
dry well. Soak briefly to make them easier to
clean.
Steam Cleaning
1. Place water (approx. 150ml) and
1 tablespoon of vinegar directly into the
steam generator.
2. Using or select the menu option
Cleaning.
3. Confirm with .
4. Using or select the menu option
Steam Cleaning.
5. Confirm with .
6. The oven now heats up to the required
temperature.
7. The duration of the process (15 mins.) is
shown in the display.
8. An acoustic signal sounds when the
programme has finished.
9. Press any button to switch off the signal.
10. Wipe out the oven with a soft cloth.
11. Remove any residual water from the
steam generator.Lay a dampened
sponge in the cooled steam generator.
Komentáře k této Příručce